(1) Positioning alarm: The system can quickly and accurately locate the disturbance site with an accuracy of 10-15 meters and a false alarm rate of <3%.
(2) Division of defense zones: One defense zone is divided every 10 meters to 15 meters.
(3) Large range: The system can perform full-range inspection over a long distance. Each fiber-optic sensor alarm system can monitor a distance of up to 80 km. The minimum is 1 km and the maximum is 80 km.
(4) Excellent stability: It can be used in wind and rain, lightning and other dangerous and harsh environments, and it has strong anti-false positive performance. Before leaving the factory, it will undergo multiple rounds of high and low temperature, alternating damp and hot environmental tests to confirm various adaptations. Harsh environment.
(5) Anti-wind and rain capability of the equipment: The system can automatically detect and adjust the wind and rain disturbances (it is not allowed to adjust manually during wind and rain). The weather detection function test automatically adjusts the area sensitivity when the system receives a disturbance signal.
(6) Strong expandability: Multiple sets of fiber-optic sensing alarm systems can send monitoring signals to the control center through precise positioning of fiber-optic sensing protection software to perform centralized management.
(7) Passive detection: The system uses optical fiber as a detection and sensing unit. Except for indoor devices that need to supply power, the whole area is passive in the outdoor area, which can effectively avoid lightning interference. It is especially suitable for use in places with high flammability, explosiveness and strong electromagnetic interference. Such as: natural gas pipelines, pressure pipelines, power systems, military, airports, chemicals and high-speed rail.
(8)Energy conservation and environmental protection: The system realizes no copper information, and the 80 km power consumption is only 60 watts to 80 watts, which is in full compliance with the energy saving and environmental protection low carbon requirements.
(9) Service life: The detection optical fiber cable uses the communication single-mode armored optical fiber cable. The outdoor life of the optical fiber cable is more than 20 years. Therefore, the entire system has a long service life, stable performance, and low cost after-sales maintenance.
(10) Compatible matching: This product is a front-end device of the Internet of Things and is equipped with a variety of data interfaces. It can be compatible with other integrated platforms and implement data interconnection to achieve system linkage. Such as: digital matrix, DVR, NVR, live sound and light alarms.
(11) Guaranteed system stability and reliability.
(12) Alarm system embedded: When the system software is damaged or the system software is shut down, the normal operation of the system is not affected. In this case, the intrusion system immediately reports an alarm. The system does not rely entirely on the access computer or IPC to operate. The alarm host can set up and operate the defense zone by connecting an alarm device with LED display.
(13) The software has multi-level login authority, electronic map function, alarm area display function, video linkage function (the key area can be linked to 1-4 channel video screen), video matrix function, live voice prompt function and so on.
(14) Measurement distance is long: The detection distance can reach 80km, and the invasion point can be accurately located.
(15) Continuous distributed measurement: Simultaneous monitoring of multiple points and multiple events can be realized without affecting each other.
(16) High sensitivity and high precision: System parameters can be directly used for standard communication optical cables according to the environment configuration. The monitoring area is divided according to the site.
(17) Rapid response: The single-channel scan cycle is as low as 0.2 s.
(18) Abundant pattern recognition: Background pattern recognition, accurate analysis of intrusion events through pattern analysis.
(19) The construction is simple and easy to maintain: The communication single-mode armored fiber used has excellent compressive and tensile strength, and the construction is convenient and simple. It is difficult to cause problems during use. Even if damage occurs, it is re-welded by professionals. You can resume work afterwards.
(20) High additional loss tolerance: The entire series can tolerate 3db of additional loss, and after removing the attenuation loss, there will be 50% extra loss and all can work normally.
(21) Highly intelligent and easy to implement unattended: When abnormalities are detected, the series can send reports to directly responsible persons through SMS and the Internet. Open design, easy data management and on-site control.